ipv6 nd reachable-time

This command sets the advertised “Reachability time” (time a neighbor is considered reachable after receiving a reachability confirmation) value. The no option sets the value to default (0).

Syntax

# ipv6 nd reachable-time <0-3600000 msec> 
# no ipv6 nd reachable-time 

Note

This command is applicable only to data-router functionality.

Command Mode

Privileged User

Example

This example sets the advertised “Reachability time" value.

(config-data)# interface gigabitethernet 0/0
(conf-if-GE 0/0)# ipv6 nd reachable-time 2000